Texas Equipment PCZ 5800, Руководство пользователя

Страница: 16 / 24

16
See Fig. 7
Lubrication hole . Remove the guide bar and check
that the lubrication hole (1) is not blocked with
sawdust or dirt. Lubricate with oil/grease.’
Guide bar . Clean the nose wheel and chain groove
of any dirt. If required, turn the guide bar over to
evenly share wear. A worn guide bar can be
hazardous to use and should therefore be replaced.
Chain . The chain should be filed regularly to ensure
the best result:
1. Ensure that the guide bar is securely attached.
2.
Use a 4.0 mm (3/8”) round file (not supplied).
3. File all of the teeth with 3-4 strokes, so that they
are uniform, as shown in the illustration.
4. The height of the teeth must be checked regularly,
and if they are too high, they must be filed down
using a flat file (not supplied).
Replacing saw chain / guide bar
Replace chain when cutters are too worn to sharpen or
when chain breaks. Only use replacement chain type
90PX033X (art. no. 441889).
Inspect guide bar before sharpening or replacing chain.
A worn or damaged guide bar is unsafe and should be
replaced. A worn or damaged guide bar will damage the
chain. It will also make cutting harder.
11. Storage
Store the pole chainsaw dry and unavailable for
children. Use the guide bar cover when the machine is
stored.
12. Specifications
Model PCZ 5800
Battery type Lithium Ion
Battery nominal voltage 58V
Battery rated voltage 50.4V
Motor power 700W
Chain speed 5 m/s
Guide bar length 20 cm
Chain oil capacity 80 ml
Net weight (tool only) 5.4 kg
13. Accessory
Extension pole 94 cm (for longer reach) can be
purchased seperately. Art. no. 90070055.
14. Warranty terms and conditions
The warranty period is 2 years for private end users in
EU countries. Products sold for commercial use, only
have a warranty period of 1 year.
The warranty covers material and/or fabrication faults.
Restrictions and requirements
Normal wear and replacement of wearing parts are
NOT covered by the warranty.
Wearing parts, which are NOT covered for more than
12 months:
•
Guide bar
•
Chain
•
Battery: If the battery is not stored correct (frost-
free and recharged every 3 months), the durability
is only guaranteed for 6 months.
The warranty does NOT cover damages/faults
caused by:
•
Lack of service and maintenance
•
Structural changes
•
Exposure to unusual external conditions
•
If the machine has been improperly used or
overloaded
•
Use of unoriginal spare parts.
•
Other conditions where Texas cannot be held
responsible.
Whether a case is a warranty claim or not is
determined in each case by an authorized service
center. Your receipt is your warranty note, why it
should always be kept safe.
REMEMBER: The purchase of spare parts as well as
any request for warranty repair, art. number (e.g.
900700XX), year and serial number should always be
informed.
* We reserve the right to change the conditions and
accept no liability for any misprints.