Texas Automation Products DES-42, Руководство пользователя, Страница: 8 / 24

7
Setting or Adjusting the Air Line Pressure
To set or adjust the air line pressure, locate the Air Regulator on the right side of the swivel head.
The required gauge pressure must be in the range of 25 PSI minimum / 120 PSI maximum. To
adjust the regulator, pull up and turn black knob. Clockwise increases pressure; counter-clockwise
decreases pressure. When pressure is set, push down black knob to lock. The following table
converts gauge pressure to total inter-platen pressure and pounds of pressure per square inch on
platen surface.
CONVERSION TABLE
GAUGE
PRESSURE
TOTAL INTER-
PLATEN
PRESSURE
LBS. PSI 2” x
4” PLATEN
LBS. PSI 3” x
5” PLATEN
LBS. PSI 4” x
6” PLATEN
LBS. PSI 5” x
6” PLATEN
LBS. PSI 3 ¼” x
5” EXTENDED
ANVIL PLATEN
25 177 22.1 11.8 7.4 5.9 10.9
30 212 26.5 14.1 8.8 7.1 13.0
35 247 30.9 16.5 10.3 8.2 15.2
40 283 35.4 18.9 11.8 9.4 17.4
45 318 39.8 21.2 13.2 10.6 19.6
50 353 44.1 23.5 14.7 11.8 21.7
55 389 48.6 25.9 16.2 13.0 23.9
60 424 53.0 28.3 17.7 14.1 26.1
65 459 57.4 30.6 19.1 15.3 28.2
70 495 61.9 33.0 20.6 16.5 30.5
75 530 66.2 35.3 22.1 17.7 32.6
80 565 70.6 37.7 23.5 18.8 34.8
85 601 75.1 40.1 25.0 20.0 37.0
90 636 79.5 42.4 26.5 21.2 39.1
95 672 84.0 44.8 28.0 22.4 41.4
100 707 88.4 47.1 29.5 23.6 43.5
105 742 92.7 49.5 30.9 24.7 45.7
110 778 97.2 51.9 32.4 25.9 47.9
115 813 101.6 54.2 33.9 27.1 50.0
120 848 106.0 56.5 35.3 28.3 52.2