Texas Automation Products DES-42, Руководство пользователя, Страница: 6 / 24

5
Chapter 2: Installing the DES-42
This chapter provides instructions to help you unpack the DES-42, check that you have all the
components, and make the hardware connections. Perform the installation procedures in the
order in which this chapter presents them.
Unpacking and Inspecting the DES-42
To remove the DES-42 from the shipping crate, you need the following tools:

A knife or suitable sharp instrument

A ½” socket wrench or suitable tool
Cut the cardboard box where it joins the skid. With the socket wrench or other suitable tool,
remove the three bolts that secure the DES-42 to the skid. Carefully lift the DES-42 from the skid
and remove all other materials from the shipping crate.
You should have all of the following items:

The DES-42 pneumatic heat seal machine

The package in which you found this operations manual
Locating and Securing the DES-42
Before connecting power and air, locate the DES-42 heat seal machine where it will be operated.
Choose a location that provides the electrical and compressed air requirements. Bolt base of
machine securely in desired place and position.
Electrical and Compressed Air Requirements

120 volt, 60 Hertz power supply

Air – 25 PSI minimum / 120 PSI maximum, .025 Cu. Ft. free air per cycle