manualshive.com logo in svg

Texas Andreas Petersen XC160-108H, Руководство пользователя

Поделиться
Скачать
Texas Andreas Petersen XC160-108H Скачать руководство пользователя страница 22

HOW TO USE THE MACHINE

 

17 

b)

 The engine stops when: 

– the operator leaves his seat and 

the parking brake is disengaged

；

 

– the operator leaves his seat and 

the 

blades are engaged

；

 

– the blades are engaged and the machine is reverse 

 
 

5.3 DIRECTIONS BEFORE STARTING WORK

 

Before starting to mow, it is necessary to carry out several checks 

and operations to ensure you can work efficiently and in maximum safety. 

5.3.1 Seat adjustment 

To change the seat position, loosen the four 

fixing bolts and slide it along the slots. 

Once you have found the right position, 

tighten the four screws. 

5.3.2 Tyre pressure

 

Having the right tyre pressure is the main 

condition for ensuring that the cutting deck is 
horizontal and mows evenly. 

Unscrew the valve caps and connect a 

compressed air line with a gauge to the valves. 
 

The pressures are:

 

FRONT        1.0 bar (15 x 6.0-6) 
REAR            1.2 bar (18 x 8.5-8) 

5.3.3 Checking the fuel and oil 

The engine manual 
indicates what type of oil 

and fuel you can use. 

With the engine off, check the oil level. 

According to the instructi

ons in the engine manual, this must be between   

the MIN and MAX marks on the dipstick. 

Refuel using a funnel, but do not   

completely fill the tank. The tank's   
capacity is about 7.5 litres. 

Refuelling should   

be carried out in an open or well 
ventilated area with the engine off.   
Always remember that petrol fumes 
are inflammable. 

DO NOT USE A NAKED FLAME TO 

LOOK INSIDE THE TANK AND DO NOT SMOKE WHEN REFUELLING 

Содержание XC160-108H







































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды