Texas Andreas Petersen TME 1600, Руководство пользователя, Страница: 9 / 11

9
Contents
Illustrations ..................................................................... 2
Warning symbols ............................................................ 6
Safety instructions .......................................................... 9
Identification of parts ...................................................... 9
Assembly ........................................................................ 9
Operating ....................................................................... 9
Adjustment of cutting height ......................................... 10
Cutting method ............................................................. 10
Maintenance ................................................................. 10
Risk of overheating ...................................................... 10
Specifications ............................................................... 10
We congratulate you on your new lawnmower. We are
convinced, that this machine will live up to your
expectations. To achive the maximum outcome of your
machine you should read this manual carefully. That will
prevent unnessesary trouble. You should pay special
attention to the safety instructions marked with this
symbol:
Safety instructions

Never let children or persons who are not instructed
in the use of the lawn mower use it.

Never use the lawn mower to purposes other than
those it is designed for.

If you are sick, tired or under influence of alcohol or
drugs, you should use the lawn mower.

The electric cable must always be complete. A
cable with defects must never be used. Always
check the cable before use.

Always pay attention to the electric cable when
using the lawn mower.

The electric extension cable must have a minumum
of 1,5mm
2
, max. length 50 metres.

Never lift the machine by pulling the cable.

Always make sure the the lawn is free of stones and
other objects that might do damage to the blades.

Always use strong foot wear and long pants.

Replace the blades as a set to maintain better
balance.

Do not use the lawn mower in wet grass.

Take care not to loose foot hold on slopes..

Do not walk backwards when mowing, as the risk of
falling over is greater, when you walk backwards.

Only use the lawn mover on grass.

The lawn mower must only be started when places
on grass. Never start the mower when it is on the
side or lying upside down.

Turn off power completely when: Leaving the lawn
mower, removing a blockage on the lawn, check,
clean, change blades or maintain the machine.

Check that all bolts and nuts are securely fastened
before use.

Replace damages parts before using the lawn
mower.
Only use original spare parts.
Identification of parts
Illustration 1:
1. Safety
switch
2. Activation handle Handle-lock
3. Upper handle
4. Lower
handle
5. Grass box
6. Cable holder
7. Carrying handle
8. Engine
9. Wheels
Assembly
Illustration 2:
Fit the handle to the machine body as shown in the
pictures.
Lower handlebar should be fixed to the brackets on the
machine. The plastic cover is fitted outside. Add the
washer and then the handle-lock bolt.
The handle-lock kan be folded in, but be careful not to
overtight it before pressing it in.
After pressed into position, it is recommende to tight the
bolt further by turning it around in closes position.
Illustration 3:
Fit the upper handle to the lower handle using the
supplied handle-lock boltes, as shown on the pictures
below (remember to add the cable hook first).
Insert the bolt with plastic handle through the holes, set
the oval plastic disc at first and then tighten the nut with
plastic collar with fingers. Finally, tilt the handle down to
tighten the handlebar fully.
Illustration 4:
Click the grass box left and right part together. Then
click the upper part and lower part together. Then click
the handle on the collector. Fit the assembled grass box
under the rear guard of the mower.
Illustration 5:
Make sure the cable hook is fitted on the upper
handlebar tube. And use the cable holders to hold the
cord in place.
Operating
Illustration 6:
1. Press the safety switch (1) and pull the activation
handle (2).
2. Hold the handle (2) when using the mover.
Release the handle (2) and the mower stops.
Be aware that the blades rotate for another 5
seconds after the handle is released.