11
GB Original instructions
Illustrations ................................................................... 2
Warning symbols .......................................................... 5
Safety precautions ..................................................... 11
Identification of the parts ............................................ 12
Assembly .................................................................... 12
Start / Stop ................................................................. 13
Adjusting carburetor ................................................... 13
Symbols ..................................................................... 13
Before start – fuel and chain oil .................................. 14
Chain Break ............................................................... 14
Automatic chain lubrication ........................................ 14
Fuel Filter ................................................................... 14
Air Intake .................................................................... 14
Oiltank filter ................................................................ 14
Airfilter ........................................................................ 15
Spark Plug .................................................................. 15
Maintenance of bar and chain .................................... 15
Maintenance intervals ................................................ 15
Storage....................................................................... 15
Technical specifications ............................................. 15
The warranty and general conditions ......................... 16
Trouble shooting ........................................................ 23
Congratulations on purchasing your new chain saw.
Please read this instruction manual carefully, especially
the safety warnings marked with the symbol:
Safety precautions
Setup
Read this manual carefully. Make sure that you are
familiar with the different controls, settings and
handles of the equipment.
The safety of working with chain saws is based on,
that the safety devices of the chain saw are is good
condition. Before using the chain saw it is important
that the brake is cleaned, the chain is checked and
filed and that the chain brakes function is checked
and works.
Know how to stop the unit and ensure that you are
familiar with chain brake.
The chain saw is equipped with a chain brake. The
chain brake should be active with a light pressure
forward on the handprotector. The function can be
tested while the engine is running with full throttle.
The saw chain should stop immediately, once the
handprotector is activated.
The chain brake is mounted in order to protect
against ”throws”, which are quick upwards going
movements of the bar. These may appear if the bar
tip hits a foreign object. Therefore it is important
you are aware of how the chain brake works.
The chain brake should be cleaned, and spare
parts must be replaced if the chain brake is not
working properly
Never allow children or people unfamiliar with
these instructions to use the machine. Note, that
local regulations can restrict the age of the
operator.
If you feel unwell, tired or have consumed alcohol
or drugs, do not operate the machine.
Always inspect the machine before usage Ensure
that no parts are worn or damaged.
The operator of the machine is responsible for
people’s safety.
Never use the machine near children or animals.
The operator of the machine is held liable for any
accidents or hazards to other people and their
property.
Do not refuel gasoline indoors or while the engine
is running.
Spilled gasoline is extremely flammable; never
refuel while the engine is still hot.
Wipe off any spilled gasoline before starting the
engine. It may cause a fire or explosion!
Boots/shoes with non-slip soles and steel jacket,
saferty gloves, safety trousers with leg protection,
helmet with visor and earprotection is required.
Avoid loose-fitting clothes.
Before you start the chain saw – make sure the
chain does not fall foul of anything.
Inspect your chain saw for worn, loose fitting or
damaged parts. Tighten bolts and nuts. The
machine must only be used in correct and
operational condition.
Make sure the chain does not move when the
engine idles.
Make sure the handles are clean and there are no
surplus of oil and gasoline.
Do not start the chain saw without having the bar
and chain assembled, as the engine can move to a
higher number of revolutions than the clutch and
chain brake has been calculated for. This can
cause damage on machine and user.
Operation
Always start the engine at the working zone.
Do not leave the working zone while operating the
machine, if it is necessary to leave the working
zone, turn off the engine before leaving the zone.
During transport, the chain bar must be covered by
a bar protector.
Make sure not to get burned on the hot exhaustion.
After striking a foreign object, stop the engine
immediately, remove the spark plug cap and
inspect the machine thoroughly for damage. Repair
the damage before continuing
If the machine should start to vibrate abnormally,
stop the engine and check immediately for the
cause. Vibration is generally a warning of damage.
Always turn off the engine and ensure that all
moving parts have come to a complete stop before
making any repairs, adjustments, or inspections.
Never allow any bystanders near the unit.
Only operate the machine at daylight or in fully
illuminated areas
Ensure a stable foothold and always keep a firm
hold on the handles. Always walk, never run.
Always hold the handles of the chain saw with both
hands and with the thumb under the front handle.
Keep the saw near your body to ensure better
control.
Let the engine body lye against the tree while
sawing.
Avoid sawing with the bar tip and make sure the
saw tip doesn’t hit anything while sawing.
Never attempt to make any adjustments, while the
engine is running.
Never operate the engine indoor or in areas with
low ventilation. The exhaustion from the engine
contains carbon monoxide. Failure to observe
could result in permanent injury or death.
Use helmet with visor and ear protection.
Use safety trousers with leg protection, safety
shoes and gloves.
