TEXA TMD2, Руководство по установке

Страница: 37 / 41

9 CONFIGURATION
At the end of the installation, TMD2 is able to work immediately as a GPS
localizer.
In order to use the advanced functions of TMD2 , you must carry out a
configuration procedure.
You may configure TMD2 through:
• the TMDStarter software,
• the on-line portal.
9.1 Configuration through TMDStarter
You can perform the configuration of TMD2 using the specific
TMDStarter software.
To connect TMD2 to the PC, you must use the specific cable (code
3903929) provided with the device.
The installation cable contains electronic components at the bottom of the
USB connector, therefore is must be handled with care.
Do not disconnect the connector from the USB socket by
yanking it
Avoid folding the cable at the bottom of the USB connector.
For more information consult the TMDStarter software operating
manual.
37
en