
8 INSTALLATION
The following chapters describe the installation procedure of
TMD2
.
Please read the following manual carefully and completely before
proceeding with the installation.
The installation must be performed by qualified personnel only.
For the installation you need:
•
Scissors and a wire stripper.
•
Flat-tip and Phillips screwdriver (medium).
•
A 12mm hole saw for the hole, if required, to pass the wiring cable pass from
the engine compartment to the passenger compartment.
•
5mm drill bit for the assembly screws.
•
Plastic cable ties.
•
Pliers for cable terminals.
•
Square tip pliers.
•
A PC connected to Internet to programme the TMD2 control unit.
The installation requires the following steps:
1.
Reading of the installation and user manual.
2.
Planning of the correct positioning of the GPS antenna (if external).
3.
Planning of the device positioning.
4.
Power supply connections.
5.
Connection of the wiring to the device.
6.
Configuration.
25
en
Содержание TMD2
Страница 1: ...ENGLISH 5 en...
Страница 2: ...2...
Страница 29: ...3 Fix the antenna so that the upper plastic part is sky facing 29 en...
Страница 31: ...The image below shows the vehicle s axles The image below shows the device s axles 31 en...