TEXA Konfort 700R Series, Техническое руководство

Страница: 48 / 86

The following operations are not required on the charging stations:
•
705R
•
705R OFF ROAD
•
707R
•
710R
•
710L
•
780R BI-GAS
Carry out the following operations with the equipment switched
off and disconnected from the power mains.
Proceed as follows:
1. Go to the right hand side of the device.
2. Insert the connection for the HP quick
hose fitting in the appropriate mini manifold.
3. Fasten the connection using the specific
screws.
4. Attach the specific adhesive ring to the
connection for the
HP quick hose fitting.
5. Repeat the operations up to here for in
order to install the connection for the
LP
quick hose fitting as well.
6. Place the tag indicating the gas type
above the mini manifold. *
7. Fasten the tag using the specific
pressure clips.
8. Pull the ferrule on the HP quick fitting
slightly back and place it on the specific
connection.
9. Screw on the ferrule.
10. Repeat the operations up to here for the
LP quick fitting as well.
(*) The specific sticker indicating the type of gas used must be
applied on the
712R charging stations.
48