TIP675-SW-42 – VxWorks Device Driver
Page 4 of 31
1 Introduction
1.1 Device Driver
The TIP675-SW-42 VxWorks device driver software allows the operation of the TIP675 IP conforming
to the VxWorks I/O system specification. This includes a device-independent basic I/O interface with
open(), close() and ioctl() functions.
The TIP675 driver includes the following functions:
reading the input register
writing the output register
programming direction of every I/O line
configure simultaneous update feature
connect interrupt callback functions to every I/O line
The TIP675-SW-42 supports the modules listed below:
TIP675-10
48 TTL I/O Lines with Interrupts
(IPAC)
To get more information about the features and use of the supported devices it is recommended to
read the manuals listed below.
TIP675 User manual
TIP675 Engineering Manual
CARRIER-SW-42 IPAC Carrier User Manual