Helpline No.: UK/N. Ireland: 08 458 684 540 Rep. of Ireland: 076 60 600 29
7
Web Support: www.unisupport.net
P50567
INSTRUCTIONS
Preparation for use to the mains
1.
Remove all the packaging from the unit.
2.
Connect the AC power cord to the mains.
3.
The silver screw protects the phonograph chassis during transportation. If the speed of your
phonograph seems slow or you hear a rubbing sound, adjust the screw with a coin to correct
the balance of the turntable.
HOW TO REPLACE THE STYLUS
Removing old stylus
1.
Set a screwdriver at the tip of the stylus and push down to the direction “A”.
2.
Remove the stylus by pulling it down and forward.
Installing a new stylus
1.
Hold the tip of the stylus and insert the other edge by pressing in the direction “B”.
2.
Push up in the direction “C” until it locks at the tip.
LISTENING TO A RECORD
1.
Connect the AC power cord to the mains, the standard is 240 volts.
2.
Plug the other ends of the RCA Cable into the auxiliary input (Aux)
on your TV, home entertainment receiver or other music system, be
sure that the red RCA Cable is inserted into the red jack and the
white RCA Cable is inserted into the white jack.
3.
Switch on the unit using the POWER switch on the front.
4.
Put a record onto the turntable, when playing a 45rpm record with a
large centre hole, remember to use the adapter which is packed in
the polybag along with the manual.