Insert the belt clip into the main unit, then push
the belt clip until it locks in place at the end of
the belt clip holder.
Straighten the other side of the belt, then put
the belt around your arm. Fasten the velcro.
To remove the belt clip: Press and hold the release
button on the belt clip, then push the belt clip
out to remove it from the unit.
Setting the time
When the power is off, press and hold the
MODE key until the time blinks. Release MODE.
Press and hold the HOUR key to set the hour
and then press and hold the MIN+ key to set the
minute. Make sure that AM or PM is shown
correctly.
Press the MODE key again to confirm the time.
HOLD
If you want to avoid accidentally pressing a key,
slide the HOLD switch to the position
LOCK
.
LOCK will appear in the display.
Slide the HOLD switch out of the LOCK position
to restore functionality to the other buttons.
7
6
Radio operation
POWER
To turn the unit on, press the POWER key on
the side of the unit. The radio frequency shows
in the display.
Volume
Adjust the volume by turning the VOLUME knob
at the side of the unit. Before you put on the
earphones, make sure the VOLUME is at the
minimum.
Putting on the in-earphone
Insert the in-earphone plug into the in-earphone
jack on the top of the unit.
Place the in-earphone into your left and right
ears, corresponding to the L and R mark on
each earbud.
Tuning in a station
Select the band (FM or AM) by pressing the
BAND key.
Tune a station using the TUNING HOUR or
MIN+ button.
Press and hold the TUNING HOUR or MIN +
button for one second, then release. The unit will
automatically scan to the next broadcasting
station.
To turn the radio off, press the POWER button.