Overview
Your armband radio consists of
the main unit, arm strap, and earphones.
5
4
Preparation
Inserting batteries
Open the battery compartment at the back of
the unit by sliding the cover downward and lifting
it up.
Insert two 1.5V batteries (size AAA) and observe
the polarity (the negative pole touches the spring).
Close the battery compartment.
When the batteries are inserted, the time
12:00
appears in the display.
Note:
If you want to save data in the memory
while changing the batteries, make sure to turn
the power off and to change the batteries within
30 seconds.
Applying the arm strap
Insert the belt strap into the belt clip, then fold
the belt strap and fasten the velcro.
LAPCALL:
show lap times
START/STOP:
start and stop
time counting
HOLD: buttons
inactive when in
LOCK position
RADIO VOLUME:
turn knob underneath
BAND: radio band
selection FM/AM
MODE: press once
for lap count function;
press and hold to set
the time
MEMORY: store
radio stations
MEMORY UP/DOWN:
Cycle through memo-
rized radio stations
TUNING /+: tune in
stations (press &
hold for auto scan)
LAP/RESET:
clear stopwatch/
lap memory
POWER:
turn on radio
HOUR/MIN:
set the time
PHONES (side of unit):
1/8" earphones connection