CD-Porty_MD40983_UK.FH11 Wed May 19 11:40:15 2004 Seite 5
To switch on the device and start playback at the same time, press PLAY/PAUSE
. "- -" will start flashing for a few seconds in the display. Additionally, the
symbol for the 60 second memory will appear. Then the total number of the
tracks and the total playback time will appear for a short time.
Playback then starts. The current track number and the actual playback time
already spent are shown in the display.
At the same time, the 60 second memory begins to fill for the anti shock function
(see "ESP FUNCTION", page 9). The display is filled with beams.
Adjust the volume through the volume control button VOLUME.
Open the CD compartment by sliding the OPEN CD switch to the right. Insert a CD with the labelled side facing
upwards. Ensure that the CD is engaged.
Close the CD compartment.
Do not open the CD compartment while the CD is still playing or rotating.
Before opening, press the STOP button twice.
VOLTAGE SUPPLY
Mains adapter
Input:
230 V ~ 50 Hz
Output:
4.5 V o 500 mA
Output power:
2.25VA
Model no.:
CSD0450600G
Subject to technical modifications.
S P E C I F I C A T I O N S
2 x 1.5 V mignon cells R6/LR6
or
2 x 1.2 V NiCd
rechargeable batteries
BATTERY OPERATION
CONNECTING JACKS
Headphones:3.5 mm jack connector, stereo
LINE OUT:3.5 mm jack connector, stereo
8
OPERATION IN THE CAR
Connect the adapter cable for the cigarette lighter to the DC input jack of the CD player. Connect the cigarette
lighter adapter to the cigarette lighter. Then, you connect the audio adapter cassette to the PHONE jack of the
CD player and insert the adapter cassette into the cassette compartment. Make sure during installation that
the adapter cassette is correctly clicked into position in the cassette compartment. Turn your car radio to cassette
playback.
In individual cases, problems might occur during the operation of the adapter cassette. In this
case, please contact our Service Centre.
5
INSERTING CD
PLAYBACK
C D O P E R A T I O N
Total playback
time of the CD
Total number
of tracks
Symbol
ESP
memory
Playback time
actually spent -
minutes: seconds
Current
track
ESP display
CD PLAYER / LASER
Laser Class:1
Wavelength
l
= 788 nm
p0 < 0.39 mW cw
DIN EN 60825-1 Ed. 2.1: 2001-08
PLEASE NOTE:
There are many non-standardised CD-recording procedures and copy protection
procedures now in use, and many different kinds of CD-R and CD-RW blanks.
Therefore in some cases read errors or read delays may be encountered. This
is not a defect of the device.
DV IN 4.5 V
PHONE
*VOLUME
CHARGE
ON OFF
BBS
ESP
M
O
DE
PROG.
®
Adapter for
cigarette lighter
DC- input jack
Audio adapter
cassette
Please make sure that the adapter cassette is
correctly clicked into position in the cassette
compartment.
DC IN 4.5V
Car cassette compartment
PHONE
jack
