Helpline No. UK/ North Ireland 0871 37 61 020 Rep. Ireland 1-800-992 508
Web Support www.medion.co.uk
Model Number: MD 30275
59
Programming the volume/mute universal functions to a particular
device
You can programme the universal remote control in such a way that it will use
only that particular device’s own volume and mute functions. The universal
function for this mode or device type is therefore switched off.
1.
Hold the
CODE
key pressed down for approx. 3 seconds, until the blue LED
remains permanently lit.
2.
Press the
MUTE
key.
3.
Press the source key for the device that is only to have its own volume and
mute functions.
4.
Press the desired volume key. The blue LED remains lit.
5.
Press the
MUTE
key, and the blue LED will extinguish.
Restoring the universal volume/mute functions
If you have changed the universal volume and mute functions as described in the
previous two sections, you can reset the functions back to the factory settings
and thus restore the “Punch Through” effect.
Keep the
CODE
key pressed down for approx. 3 seconds until the blue LED
remains permanently lit.
Keep the
MUTE
key pressed down until the blue LED extinguishes briefly.
Press
MUTE
again. The blue LED will extinguish completely. The volume and
mute functions are now restored to their factory defaults.