OPERATION – SLEEP
1. Press SLEEP, 'SLEEP' will appear on the display.
2. Keep pressing SLEEP to adjust the sleep time in the order of 90>80>70....10 minutes.
3. To cancel the SLEEP mode, press SLEEP again.
OPERATION – PRESET EQUALISER
Press PRESET EQ to select the digital sound performance in the order of CLASSIC, ROCK, POP
and FLAT.
OPERATION – MUTE
Press
MUTE
to terminate the sound output. Press again to cancel this mode.
AM ANTENNA INSTALLATION
Connect the AM aerial leads to the two AM input sockets. To fit base plate for AM aerial, simply
fold base plate 180 degrees until it reaches the base plate fixing slots, press the base plate clip
outwards to allow the base plate to lock into place. Do not force.
GENERAL INFORMATION
Set not reacting when any function button is pressed.
Hang up problem due to electro-static discharge and/or software, press POWER button
to switch off and then on the unit or in the worst case, pull the mains plug out
of the wall socket and then reconnect the unit.
10
ELECTRICAL SAFETY
When using electrical products always observe safety regulations where applicable to reduce the risk of fire,
electric shock and personal injury.
Always check that the power supply corresponds to the voltage on the rating plate. When using any electrical
apparatus always observe safety regulations and use basic safety precautions to reduce the risk of fire, electric
shock and personal injury, including the following
.
Read, Keep and Follow these instructions, heeding all Warnings.
Keep out of reach of young children. This apparatus is not suitable for use by young children or infirm persons
without supervision. Young children must be supervised to ensure that they do not play with the apparatus.
WARNING. Do not insert any objects into any openings of an electrical apparatus.
WARNING. Do not touch any moving parts of any electrical apparatus.
WARNING. Do not use this apparatus near water. To avoid the risk of fire or electric shock, do not expose this
apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashes.
WARNING. No objects filled with liquid, such as vases, shall be placed on any electrical apparatus. Do not
immerse in any liquid whilst in use or in cleaning. Clean only with a damp cloth, dry with a dry towel. Do not
use harsh abrasives as these may damage plastic parts.
DO NOT block any ventilation openings. Keep away from curtains, newspapers and restricted areas. Install in
accordance with any specific manufacturer’s instructions. Always allow a sufficient gap around the apparatus to
avoid overheating.
DO NOT install near any heat sources such as radiators, gas heaters, stoves or other apparatus (including
amplifiers) that produce heat. Do not leave in direct sunlight.
WARNING. Do not place any naked flame source, such as lighted candles on any electrical apparatus.
WARNING! Connect to a suitable 230-240 ~ 50 Hz power supply only. If a class 1 product it must be connected
to a suitably earthed mains socket.
11