REMOTE CONTROL
1. POWER Key
2. PRESET EQUALIZER Key (EQ)
3. VOLUME Key
4. SNOOZE Key
5. INTRO Key
6. REPEAT Key
7. F.F Key
8. STOP / BAND Key
9. MEMORY-UP Key
10. FUNCTION Key
11. DISPLAY Key
12. REW Key
13. PLAY/PAUSE Key
14. PROG/MEM Key
15. RAND Key
16. TIMER Key
17. SLEEP Key
18. MUTE Key
INSTALLATION
Unpack all parts and remove protective material.
the remote control transmitter as shown in the
e mains before checking the main voltage and before all other
ake sure that there is a space of several centimetres around the unit
4
•
• Insert the batteries (2xUM-4/SIZE "AAA") into
battery compartment.
• Do not connect the unit to th
connections have been made.
• Do not cover any vents and m
for ventilation.
CONNECTIONS
A) Terminals for two loudspeakers (minimum speaker impedance 4 ohm.)
Attach loudspeaker cables to the unit.
Left speaker: connect the wire to terminal 'L'.
Right speaker: connect the wire to terminal 'R'.
B) Terminal for FM antenna. The antenna wire supplied with the unit can be connected to terminal. Adjust
the position of FM antenna for optimum reception. For good FM stereo reception, use an FM outdoor
antenna or connect the supplied antenna wire to your house distribution system.
C) Voltage selector (not on all version). If your version has this selector, check that the setting corresponds
with your local mains voltage. If the selector must be reset, disconnect the AC power cord.
D) AUX input. For connection of other sound sources. (e.g. TV or VCR audio output).
OPERATION
POWER STANDBY ON/OFF
When you first plug the unit into the mains, the unit will go into standby mode. The display will show the time.
– You can press
POWER
to switch on the unit.
– The standby function of the unit remains on until the unit is switched on.
– Pull the main plug out of the wall socket if you want to switch off the main voltage completely.
OPERATION – CLOCK SETTING
1. Press DISPLAY for changing to Clock display.
2. Press and hold MEMORY/CLK ADJ, the first second digit of "24H" will flash, press
SEARCH/CLK
to set the correct hour mode.
3. Press MEMORY/CLK ADJ to select the hour setting, the first second digit of "00" will flashes, press the
SEARCH/CLK
to set the correct hours.
4. Press MEMORY/CLK ADJ again to select the minutes setting, the third fourth digit of "00" will flashes, press
the
SEARCH/CLK
to set the correct minutes.
5. Press MEMORY/CLK ADJ again to store in the memory.
5