7
After Sales Support
Telephone:
1300 886 649
Installing batteries
The unit requires three 1.5V AA size batteries (supplied). We recommend using
alkaline batteries.
To install batteries, first make sure the unit is disconnected from the telephone line.
Open the battery compartment cover and insert the batteries following the polarity
markings in the compartment. Then close the cover.
Once the batteries have been installed correctly, a time display will appear on the
LCD screen. (To set the time and date, see page 12.)
Connecting the phone and attachments
•
Insert one end of the line cord to the line jack at the back of the phone and the
other end to your phone outlet at the wall.
•
Use the coiled cord to connect the handset to the left side of the phone unit.
•
Plug the headset into the earphone jack at the right side of the phone unit.
•
Select the correct dialling mode to 'tone' (see page 14 for instructions). The
default setting is 'pulse' dialling.
•
Calling Number Display (CND) is a feature that allows you to see the telephone
number of incoming calls displayed on your handset's LCD screen, if your
caller's service is CND-enabled and they have not blocked transmission of their
number. To have your number displayed on outgoing calls, your telephone
service must be CND-enabled; check the costs for this service with your
telecommunications provider.
Getting started
