RADIO
RADIO
SELECTING TUNER BAND
TUNING TO AN RDS STATION
RDS allows some text information to be broadcast within the radio signal. An RDS radio is capable of receiving
and displaying the information. e.g song name, time of day, show name
1.
Press
SOURCE
repeatedly to enter Tuner mode.
2.
Press
BAND
to select between FM or MW radio band.
Note:
Tips:
RDS stations broadcast on FM only. When the tuner detects an RDS signal, the RDS icons turn on. RDS
depends on broadcast signal and is not available in all areas.
Your audio system has room for 32 preset stations.
1. Press
or
to go to your desired frequency.
TUNING TO A STATION
2. If an RDS station is found, the RDS light will show on the display as well as the station name.
Press
or
to select frequencies. Press and hold to start auto searching for the next available
station.
DISPLAYING RDS STATION INFORMATION
Press
REPEAT/RDS
on the remote control repeatedly to display the following:
AUTO PRESET PROGRAMMING (FM ONLY)
•
Frequency
•
Station name (PS)
Press and hold
BAND
for 2 seconds to scan stations in FM band. The stations will then be stored as
preset channels. A maximum of 32 stations can be stored. Beware of your preset channels being
erased accidentally because the scanning and storing process is automatic upon pressing the button.
You can stop the automatic scan be pressing any button, but the erased stations cannot be recovered.
•
Station type (PTY)
•
Clock time (CT) or
•
Radio text (RT)
In Tuner mode, press the
INTRO.CT
key to replace the displayed time with RDS time (if available).
MANUALLY SETTING PRESETS
SEARCHING BY PROGRAM TYPE (PTY)
(Remote Only)
1.
Press
or
to access the desired frequency.
2.
Press
PROG
once.
3.
The most recently accessed program location will be displayed.
/
PTY
to enter PTY selection
1.
Press
4.
If a different program location is preferred, press
c
or
d
on the remote control to move
to the desired preset number (1-32).
/
PTY
repeatedly to select a PTY mode.
2.
Press
5.
Press
PROG
to store the selected frequency at that preset.
3.
Within 5 seconds, press
or
to search for a station broadcasting the selected type of program.
USING PRESTS
Press
BACK/SELECT
on the main unit or
c
or
d
on the remote control to access the previous or
next preset station. The PROG icon lights up when a preset station is selected.
The display first shows the preset program number and after a few seconds, the radio frequency will
be displayed.
SUPPRESSING STEREO SIGNAL
Press
FM ST
to toggle between FM mono and stereo mode (remote control only). “STEREO” is
displayed when in stereo mode. Set the unit to MONO if stereo signal is not strong enough, to cut
down on’ static’.
17.
16.