COPYRIGHT
GETTING STARTED
This product should only be used for the purposes for which it is sold, that is, entertainment,
violating no copyright law. Any attempt to use this product for which it is not intended is unlawful
and therefore not condoned by Tevion
SPEAKER WIRE CONNECTION
®
Portions based upon Microsoft Windows Media Technologies. Copyright © 1999 Microsoft
Corporation. All Rights Reserved. Microsoft, Windows Media and the Windows Logo are
trademarks or registered trademarks of Microsoft Corporation in the United States and/or other
countries.
GETTING STARTED
BACK VIEW
1.
Main Speaker Jacks (high pass)
2.
Woofer jacks (low pass)
3.
MW loop antenna jack
INSTALLATION
4.
FM Pigtail antenna
To ensure sufficient ventilation, keep the minimum spacings shown below free from other surfaces:
USING THE FM AND AM ANTENNAS
Before you use your audio system, you’ll want to make sure both the FM and AM antennas are
positioned properly. Uncoil the FM antenna at the back of the unit, making sure it is fully extended
(you may even want to tape it to the wall behind the unit if possible, the higher the better). You’ll
also need to connect the AM antenna loop to the back of the unit if you listen to AM stations. Rotate
the AM loop antenna for better reception.
CONNECTING THE MAIN SPEAKERS
Each speaker has a black/red wire and a purple/black wire. When connecting the speakers match the
red/purple wires to the red/purple jacks and black wires to the black jacks on the main unit.
4.
Front View
Side View
5.