Helpline No. UK/ North Ireland 0871 37 61 020 Rep. Ireland 1-800-992 508
Web Support www.medion.co.uk
Model Number: 82663
15
Normal operation
12
Operating individual devices
After you have finished programming your remote control for
your audio/video devices, the remote control will work in the
common main functions just like the original remote control
for the respective device.
Point your remote control at the desired device and press the
relevant mode key. The mode key label is displayed with the
programmed in code. [For the universal functions page 23–
you do not need to press the mode key in advance.]
Activate the functions by pressing the corresponding function
key on your universal remote control. The symbol for infrared
transmission appears each time you press a key.
Each time a key is pressed the display backlight switches on for between 10 and 60
seconds (to set this duration please read: “Backlight” on page 9).
Please note
In certain circumstances, not every function of your original remote control
may be directly available on the universal remote control.
Especially for newer devices, it might be possible that the functions are stored to
different keys than expected or may not even be available at all.
In these cases you can use the learn function to transfer the functions of your original
remote control to the desired keys of the universal remote control (see “Learn
function” on page 19).
SHIFT function
After you program a device code, the universal remote control keys can have double
functions (with the exception of the
SETUP
and
MACRO
keys).
To use the second function, briefly press the
SETUP
key and then (within 15-20
seconds) press one of the secondary function or number keys.
Try out which additional functions a key has for a particular device code.
Recordings
The
(Record) key for recording (e.g. on video recorder, DVD, or cassette recorder)
must be pressed twice. This acts as a protection from accidental recordings.
EPG – Electronic Programme Guide
The
EPG
(“Electronic Programme Guide”) key has various functions depending on
which code has been used:
For TV and satellite codes (e.g. SAT-TV or DVB-T), the button opens the electronic
programme guide.
For DVD codes the button opens the title menu.
For VCR codes you can use the button for programming, if your video recorder has a
Showview function.
For a Sky Box set up, use the button for opening the Sky TV Guide. See page 25 for
other Sky keys on your device.
If the device has both an EPG and a Showview function, the EPG function is given
priority.