Tevion 49180, Руководство пользователя

Страница: 6 / 20

Before you Install
Car audio equipment installations can be troublesome at times, even to the
most experienced of installation technicians. If you are not con
fi dent working
with electrical wiring, removing and reinstalling interior panels, carpeting,
dashboards or other components of your vehicle, please call our customer
support number 01270 508538 and we will recommend
fi tters in your area.
6
1. Remove the outer trim frame.
Din Front Mount
2. Insert the keys supplied with the old
unit into both sides of the unit as
shown in
fi gure below until they click.
Pull to remove the old unit from the
dashboard.
DO NOT DISCONNECT WIRES
AT THIS TIME!
3. Mark the polarity of the speaker wires. Marking the polarity of the speaker
wires will make it easier to connect the existing speakers to your car radio.
Consult wiring diagram of existing head unit before disconnecting any
wires. If you are not positive of the polarity of the existing wires from the
speakers to the head unit, install new wires.
a. While the old unit is playing, disconnect the wires from one speaker.
b. Take a length of masking tape and fold it around the wire so it forms a fl ag.
c. On the masking tape mark the polarity of the speaker wires (+ & -), as well as
left or right and front or rear.
d. Double check that you marked the fi rst speaker correctly by checking
that the speaker wires are the same at the head unit.
e. Repeat the procedure for all of the speakers.
f.
Mark the power, ground and any other wires also.