DISPLAY & KEY SETTINGS
Turn Signal / Mode Switch
The switch has the following functions: light, turn signal, and
horn button. When the light button is pressed, the front and
rear deck light will turn on.
When the turn signal button is pressed, the front and rear deck
light will turn on and flash. When the horn button is pressed,
the horn will start to work.
When multiple buttons are pressed, the priority for the function
from highest to lowest is turn signal, brake, and then light.
（1）Speed step setting
Can adjust with button.
While the instrument panel is on，press to set the speed step.
The setting is completed when the selected speed step value is selected.
* Blinks 3 times per 10 seconds when the remaining battery power is 10%.
It blinks continuously when the remaining battery power is 10%.
（2）Functions and settings for each main screen
mode can adjust with button.
（3）Instrument panel detailed function
You can change the setting mode by turning on the power of the
dashboard and pressing for 2~3 seconds.
In the setting mode, press once to change the internal setting
value
* If you change default setting value P0(13), P1(72), 3 P2(15), P3(0)
the exactinformation is not displayed.
Display Settings –
The scooter is equipped with the following display:
10
9
Speed
Speed step
Power button
Accelerator
index finger
throttle
Mode button
Driving time
Speed unit
Battery balance
Mode
Discription
Accumulated mileage
Not in use
Current voltage
Drive time
Setting mode
Setting value
Current mileage
(Press and hold mode button to reset to '0')
TRIP
ODO
CHA
VOL
TIME
11(Fixed)
Start method
0(Acceleration start),
1(Kick start)
Electronic
brake power
0(Off)
~5(Powerful)
60(Fixed)
Cruise mode
0(OFF)
1(ON)
LCD brightness
control
0(Back light off)
~5(Brightest)
15(Fixed)
Slow start
0(Off:Power start)
~5(Slow start)
Auto off
time setting
5~30 minutes
0(Fixed)
Max output
5~100%
(User adjust)
ABS setting
0(OFF),
1(ON)
Speed unit
0(Km/h), 1(mp/h)
Battery save
1(MAX SAVE)
2(MID SAVE)
3(NO SAVE)
