background image

17

If the product is subjected to an impact force, its use must be discontinued immediately. If the 
slightest doubt remains, the product must be retired.
Always use correct personal protection equipment for work in trees! Your equipment and its 
components, respectively, must meet the harmonized standards under the regime of the Euro-
pean regulation (EU) 2016/425 on Personal Protective Equipment (PPE)  and must be compati-
ble. 

It is the responsibility of the user that a relevant and ‘live’ Risk Assessment is in place for the 
work to be carried out which includes emergency contingencies.
A plan of rescue measures that covers all foreseeable emergencies needs to be in place before 
this product can be used. Prior to and during use, rescue measures that can be executed sa-
fely and effectively must be considered at all times. 

When 

transporting

 the product, it must always be protected from light and dirt and provided 

with suitable packaging (moisture-repellent material that is impervious to light).

Conditions of storage:

  Protected from light (UV radiation, welding machines, …)

  Dry and clean

  At room temperature (15-25 °C)

  Not in the proximity of chemicals (acids, lyes, liquids, vapours, gases, …) and other 

  aggressive environments

  Protected against sharp-edged objects

Therefore, store the product dry and ventilated in a moisture-repellent bag that is impervious to 
light.

For 

cleaning, 

use lukewarm water and mild-action detergents. Then, rinse the equipment with 

water of drinking quality and dry it prior to putting it into storage. Dry the product in a natural 
way, not near fires or other heat sources. 

Checking the equipment at regular intervals is absolutely necessary: your safety depends on 
Checking the equipment at regular intervals is absolutely necessary: your safety depends on 
the effectiveness and durability of the equipment!
Even if this product is not PPE we recommend handling, maintaining and inspecting it as if it 
were.  

Before and after each use, the product should be checked for abrasion and cuts. Also check it 

REGULAR CHECKS & INSPECTION 

SECURITY / TRANSPORT, STORAGE & CLEANING / 

REGULAR CHECKS

TRANSPORT, STORAGE AND CLEANING   

Содержание antiSHOCK











Отзывы: