11
• Subwoofer T8/T10
Use and Settings
Automatic activation/
deactivation
–
You can switch the mode with the
POWER switch (9):
ON
The subwoofer is perma-
nently switched on.
AUTO
The subwoofer switches
itself on as soon as an
audio signal is present.
If there’s no audio signal
for approx. 20 minutes,
the subwoofer switches to
standby.
–
If the auto-function doesn’t switch
correctly, you can use the AUTO
LEVEL control (14) to increase the
sensitivity (turn to the right) or to
decrease it (turn to the left). You
will need a small screwdriver to do
this.
Establishing a wireless
connection
If your receiver is compatible, estab-
lish the cordless connection to the
subwoofer like this:
1. If applicable, slide the INPUT switch
(10) to the “WIRELESS” position.
2. Switch your subwoofer and your
wireless-compatible receiver or
also the subconnect transmitter
on.
The STATUS LED (6) will blink and
the devices will now automatically
connect. An existing connection
is indicated by the continuously
illuminated STATUS LED (6).
Proceed as follows to connect for
the first time or if the devices do not
connect automatically or the connec-
tion is interrupted:
1. Hold down the PAIRING button (16)
until the STATUS LED (6) blinks
quickly.
2. Then perform the corresponding
steps on your receiver to establish
the connection (for this, refer to the
user manual for your receiver).
Adjusting the volume
–
Use the SUB LEVEL control
(13) to adjust the volume of the
subwoofer.
If the CLIP LED (7) lights up, the
input signal is too high. In this
(6)
(16)
(14)
(8)
(10)
(9)
