13
• REAL BLUE IN
4.3 Connecting with
the headphone
1. Press and hold the power button
for 2 seconds to switch on the
headphones.
2. If the device has not been
connected to before (or has been
reset), the device will automatically
enter pairing mode. This is
indicated by the LED flashing blue,
and with audio feedback.
3. Open the Bluetooth settings on
your device and add a new device.
Then select the ‘Teufel REAL
BLUE IN’ from the list of available
devices. If pairing is successful, the
LED will stay blue for 3 seconds,
and there will be audio feedback
from the headphones.
Set
Bluetooth
Bluetooth
Device
Teufel REAL BLUE IN
ShareMe
The Teufel REAL BLUE IN is equipped
with ShareMe feature and can share
music between two sets of Teufel
Real Blue In headphones wirelessly
and simultaneously.
1. Establish a Bluetooth connection
on the first set of headphones.
2. Start music playback on the first
set of headphones.
3. Press the Volume Up button
& Multi-Purpose button at the
same time on the first set of
headphones. The LED flashes
purple quickly and the headphones
will also give audio feedback. The
first set of headphones is now
ready to connect to the second set
of headphones.
4. Switch on the second set of
headphones and then press the
Volume Up button & Multi-Purpose
button at the same time. The
LED flashes purple quickly and
the headphones will also emit an
acoustic signal.
NOTICE
Make sure that the music
is paused on the second
headphone if it is already
connected to a smart device.
