22
• POWER HIFI
Bluetooth
®
Mode
Via Bluetooth
®
, you can connect a compatible external
player wirelessly to the POWER HIFI. The audio
output of your external player is then emitted via the
POWER HIFI.
The Bluetooth
®
wireless transmission system has a
range of approximately 10 metres that is limited by
walls and furnishings. If the connection is cut off, the
POWER HIFI will attempt to re-establish a connection
until you select another source.
You can also register two Bluetooth devices and have
them played in alternation.
NOTICE
Only use the Bluetooth® function in loca-
tions where wireless radio transmission is
allowed.
Please keep in mind that the Bluetooth®
behaviour may differ depending on the
external player’s operating system.
Bluetooth® options
Depending on the device type, your external player
(e.g. smartphone) may also have a menu for Blue-
tooth® options such as media playback. You can find
more information about the Bluetooth® options in
the instruction manual for your external player/smart-
phone.
Bluetooth® pairing
To play the audio of your external player on your
POWER HIFI via Bluetooth®, you must first connect
the devices with each other. The technical term for
this is “ pairing”.
1. Activate the Bluetooth® function on your external
player (e.g. smartphone).
2. Select the “Bluetooth” input on the POWER HIFI.
For this, push the button
(32)
or, if applicable,
push the SOURCE button
(16)
multiple times until
the LED
(14)
illuminates in blue.
3. If the POWER HIFI is not connected to an external
player, pairing will start automatically and the LED
(14)
will quickly flash blue.
Otherwise, push the button
(32)
and hold it down
for approx. 2 seconds or briefly push the PAIRING
button
(15)
to start pairing.
Pairing will be active for approx. 60 seconds.
Afterwards, the LED
(14)
will blink slowly. This
indicates that there is no connection.
4. Let your external player scan for Bluetooth®
devices. You will find more information about this in
the user manual of your external player.
After the search run, the “POWER HIFI” should also
be present in the list of detected devices.
5. Select “POWER HIFI” from the list of detected
devices.
6. If your external player asks for a code, enter “0000”
(four zeros).
Pairing is now complete and your POWER HIFI will
now act as a Bluetooth® playback device. The
POWER HIFI will now play back all sounds that
would otherwise be played by your external player/
smartphone.
7. If you would like to pair a second external player,
repeat the above steps with the second device.
Then select the POWER HIFI again from the list of
paired devices on the first device. Now you can use
both devices in party mode in alternation.
Restoring the connection with a paired external
player
If your POWER HIFI was previously connected to the
external player, it is no longer necessary to switch it
to pairing mode to connect again. Simply selecting
“POWER HIFI” on your external player from the list of
paired devices is enough.
The POWER HIFI stores the pairing data of the last 7
external players (max.) which were connected to the
system.
–
To delete the list of external players, push the
button
(32)
for 10 seconds.
External players can then only establish a connec-
tion after re-pairing.
