29
• MusicStation
Troubleshooting
The following advice should help you to solve problems. If this does not help, you will find
useful information in the detailed FAQs on our website. Otherwise, please contact our
hotline (see page 3). Take note of the warranty instructions.
Problem
Possible cause
Solution
The device is not
working, the sensor
button
(3)
is dark.
No power supply.
Check to make sure that the
mains adapter is properly connect-
ed (see page 13).
Check the function of the socket
with another device.
No sound.
The wrong source has been
selected.
Select the right source (see page
15).
The device is set to mute.
Push the button
(17)
or adjust
the volume.
The volume is set to “0”.
Increase the volume.
No sound in Blue-
tooth mode.
No Bluetooth connection.
Establish a connection (see page
27).
MusicStation has not been
selected as the output
device.
On your source device, select “Mu-
sicStation” as the output device.
Bluetooth connection
impaired by another radio
system (e.g. cordless tele-
phone, Wi-Fi).
Set up the MusicStation and/or
source device in another location.
Move to another room to test.
No sound via cable
(AUX IN).
Volume of the playback pro-
gram has been set to zero.
Carefully increase the volume on
the source device.
Playback is noisy.
In general, the MusicStation
is a very low-noise system. In
most cases, the system with
very high resolution in the
high range area can expose
the poor quality of a signal
source (e.g. from MP3 files).
Ensure that the source is sending
a clear signal to the MusicStation
system.
The time is flashing.
The time is not set.
Set the time (see page 17).
The display stops flashing.