22
• Kombo 11
The Kombo 11 is equipped with a
radio for DAB+ and FM/USW.
•
DAB
– Reception of digital radio
stations in the band from 174.928
to 239.2 MHz (block 5A to 13F),
display of data/text possible.
•
FM
– Reception of analogue mono
and stereo stations from 87.5 to
108 MHz, RDS mode possible
20 memory slots are available for
your favourite stations.
FM/USW
–
Push the FM button
(29)
or select
“FM” with the SOURCE buttons
(20)
/
(49)
.
Setting the radio stations
Set the receiving frequency with the
skip buttons
(14)
/
(57)
and
(13)
/
(45)
:
–
Automatic: Pushing the button
for approx. one second initiates
station scanning in the desired
direction (then release the button)
until the radio turns to the next
station with sufficient transmission
power.
–
Manual: Each time you tap the
button, the frequency will be
increased or decreased by 0.05
MHz.
The set frequency is displayed on the
display panel
(16)
.
Radio Playback
If the station transmits an RDS
signal, the name of the station and, if
applicable, the radio text will appear
on the display panel
(16)
after a few
seconds.
–
With the button
(47)
, you can
switch the display of the RDS
information on the bottom line of
the display panel
(16)
between
station name, radio text, time and
programme type.
In stereo mode, you may experience
noticeable noise with weak stations.
In this case, you switch to mono-
mode by tapping the MODE button
(12)
/
(58)
.
DAB/DAB+
–
Push the DAB button
(28)
or select
“DAB” with the SOURCE buttons
(20)
/
(49)
.
DAB station scanning will automat-
ically start the first time you access
DAB. In the process, the first 20
stations that are found are assigned
to the station memory slots 01–20.
–
If necessary, you can activate the
scan at any time by tapping the
SCAN button
(35)
.
Once station scanning ends, the first
station that is found will be played.
On the display panel
(16)
, you will
see the name of the station and
underneath the current song being
played.
