• KB 42
15
Suitable CDs
• Only use commercially-available CDs carrying one of the
adjacent symbols.
• CDs containing MP3 fi les can also be read.
• Normal CDs with a diameter of 80 and 120 mm can
also be used.
• CDs (CDR, CDRW) burnt on a home system can normal-
ly be read but high burn speed or “bad” blank discs can
cause problems. The only solution is trial and error in
this case.
• CDs produced for commercial purposes cannot always
be read.
About handling CDs
Every CD is encased in a durable plastic layer to protect
it against outside infl uences. However, you must always
protect the disc against dirt and scratches.
CD players can compensate minor damages on the CD.
Larger scratches or other damages can cause the disc to
catch or lead to similar errors.
For more information about the correct handling of CDs
see the notes on the CD sleeve!
Inserting a CD
Attention Risk of damage!
Do not insert CDs on top of one another. Do not
insert any other objects than CDs.
• Use the button
11
“Source” or
46
“Source “ and
31
“Source “ to select “CD” as the source.
• Push the button
6
“
“
or
25
“ ”. The CD tray will
slide out forwards.
• Insert the CD carefully into the depression inside the CD
tray with the printed side facing up.
• Push the button
6
“
”
or
25
“ ”. The CD tray will
close and the unit will read the CD. The display panel
will show the message “LOADING” and after a few sec-
onds playback begins automatically.
The playback functions for CD and USB are identical and
are described in the section „CD and MP3 Playback Func-
tions“ on page 17.
Ejecting a CD
• Stop playback by pushing the button
6
“
”
or
42
“
”
.
• Push the button
6
“
”
or
25
“ ”. The CD tray will
slide out forwards.
• Remove the CD from the CD tray.
• Push the button
6
“
“
or
25
“ ”. The CD tray will
close.
CD Mode
6
11
46
31
25
42
