Teufel KB 22 CR, Техническое описание и инструкция по эксплуатации

Страница: 21 / 24

• KB 22 CR 21
Timer / alarm function
This function allows you to program a time for the unit to
switch on . The clock must be set to the correct time (see
„Setting the time“ on page 13) .
1 . Switch the unit to standby using button
15
or button
48
“ ” . If the unit is in EcoPower mode, press button 42
“CLOCK” briefly to show the time .
2 . Press and hold button 27 “TIMER” until the display
shows “TIMER SET” followed by the type of operation
(eg . “USB”) .
3 . Select the type of operation to be active when the unit
switches on (e .g . “TUNER”) using buttons 28 “ ” /
30 “ ” or the volume control 10 “VOLUME” .
4 . Press button 27 “TIMER” once briefly . The display
shows the time when the unit will switch on, the hour
display is flashing .
5 . Set the hour using buttons
28
“ ” /
30
“ ” or
volume control 10 “VOLUME” .
6 . Press button 27 “TIMER” once briefly . The display will
flash the minutes .
7 . Set the minutes using buttons 28 “ ” / 30 “ ” or
volume control
10
“VOLUME” .
8 . Press button
27
“TIMER” once briefly . The display will
show the volume level when the unit switches on .
9 . Set the desired volume using buttons
28
“ ” /
30
“
” or volume control 10 “VOLUME” .
10 . Press button 27 “TIMER” once briefly .
Programming is now complete .
The current time is now displayed once again . The
display shows the timer symbol which indicates that
this function is active .
The unit will switch itself on at the programmed time
with the selected type of operation and with the
selected volume level .
Switching the timer /alarm function on and off
1 . Switch the unit to standby using button 15 or button 48
“ ” .
2 . Press button 27 “TIMER” briefly to switch the timer func-
tion on and off .
•
On : Timer symbol is displayed
• Off : Timer symbol is not displayed
KB 22 RC
27
48
28
30
10
15