10
• Concept C 200
Use
Activating and deactivating
8
• Using the mains switch
8
, you can activate or deacti-
vate your
Concept C 200
.
In standby mode and LED
1
is red.
1
• With the button
1
“Standby” or
14
“Power”, you
can switch your
Concept C 200
to operating and/or
standby mode.
In operating mode, the LED
1
is blue.
Automatic shutdown
If there is no audio signal for 20 minutes, the subwoofer
switches to standby automatically. The subwoofer acti-
vates as soon as an audio signal is present on the RCA
jacks
4
“LINE IN”
Tabletop remote control
13
14
15
B
C
A
13
“Bass”: You can use this rotary encoder to control the
bass reproduction of your subwoofer.
LED
A
indicates a lower bass level, whereas LED
B
indicates a higher bass level.
14
“Power”: Use this button to switch the
Concept C 200
on
or to Standby mode.
15
“Volume”: Use this rotary encoder to set the volume of
the
Concept C 200
.
LED
C
shows the relative volume. Any separate volume
settings at the source device (PC, Mac, CD player, etc.)
are not considered here.
17
16
16
“PHONES”: You can connect earphones here using a
3.5 mm phone jack. The subwoofer and satellite speakers
are then automatically switched to mute.
17
“MIC”: You can connect a microphone here using a
3.5 mm phone jack. The microphone is automatically
recognised by the computer. You may receive the notifica-
tion that a recording device has been connected.
Note:
The microphone works only if you have connected
the
Concept C 200
via USB to your computer.
