Teufel Cinebar Ultima, Техническое описание и руководство пользователя

Страница: 25 / 40

25 • Cinebar Ultima
• AutoOn – Set AutoOn for each
Source
For every input (TV-ARC, HDMI, AUX,
Optical, BT, USB), you can switch
automatic activation on and off here
(see also page 18).
For the analogue source “AUX”, you
can adjust the sensitivity from which
the automatic activation function
is to recognise an audio signal at
the analogue input AUX IN
(14) and
switch the Cinebar Ultima on from
standby:
Off (no AutoOn),
Minimal (only at a high input level),
Low, Mid, High,
Maximal
(already at a low input
level).
Softw. - Software Information and
Update
• Version
• Update – Start Update Mode
These menu items are intended for
the software update (see „Software
Update“ on page 31).
Info
Displays the current system param-
eters: Current volume (or mute),
Current input source, Stream type
(PCM, DD 2.0, DD 5.1), Tone Settings,
Active sound mode (e.g. Dynamore
Center), Software Version.
Reset – Perform System Reset
Here, you can reset some or all
parameters to the default settings.
• BT – clear the list of known
Bluetooth ® devices.
• Wirel. – clear the list of connected
wireless speakers (rears and
subwoofer).
• Full – reset all parameters to the
factory settings.
After selecting one of these items the
question “Reset?” appears. Press the
the navigation button
(39) or the
button (11) / (37) to perform the
reset. To abort, press the button
(36) or (9) .
After a full reset, the Cinebar Ultima
switches to standby.