Teufel Cinebar Trios, Техническое описание и руководство пользователя

Страница: 22 / 36

22
• Cinebar Trios (CS 42)
Most functions of your Cinebar Trios
(CS 42) are configured via the main
menu. You can navigate through the
menu with the remote control. It will
be shown on the connected TV set.
Both devices must be turned on. The
Cinebar Trios (CS 42) must be selected
as the source on the TV set.
To use the menu:
1. Push the MENU button (22) .
The main menu will open.
2. Select the desired sub menu with
the navigation buttons (32) and
access it with the OK/INFO selec-
tor button
(21) or the navigation
button (32) .
The sub-menu will open.
3. Select the desired menu item with
the navigation buttons (32) .
32
21
22
4. Set the desired values with the
navigation buttons (32) .
5. Push the navigation button (32)
to return to the previous menu.
Menu
Speaker Sound Levels Wireless Setup System Tone
Leaving the menu
To leave the menu, push the MENU
button
(22) .
Tone
Here you can configure the sound
within three frequency ranges:
• Treble high tones
• Middle mid range tones
• Bass low tones
You can configure either of the tone
ranges from “–10 dB” (lower) to “+10
dB” (increase).
The settings for high and mid range
tones only affect the front channels of
the Cinebar Trios (CS 42) (left, middle,
right); bass controls the subwoofer
level.
Sound Level
You can increase or decrease the rel-
ative volume from “+10 dB” to “–10
dB” for each speaker here.
You can also replace normal audio
playback with a test tone (a noise)
whose volume can be adjusted using
the /– buttons
(19/20) .
The test tone mutes as soon as you
leave the sub-menu.