15
• Cinebar Trios (CS 42)
Wall mounting
Proceed with care when mounting the
Cinebar Trios (CS 42) on the wall and
follow the instructions below.
You will need the following material to
mount the Cinebar Trios (CS 42) on a
solid stone wall:
• 2 Nylon plugs (ø 8 mm)
• 2 screws, 5 x 50 mm, screw head =
ø approx. 10 mm
CAUTION
Risk of injury/damage!
– Only qualified per-
sons may mount the
Cinebar Trios (CS 42) on the
wall.
– The Cinebar Trios (CS 42)
may only be mounted on a
suitable, solid wall. Special
dowels or anchors may be
necessary when mounting
the Cinebar Trios (CS 42) on
lightweight walls. Consult a
qualified professional in this
case.
– Make sure that there are no
cables or pipes in the drilling
areas. Before you drill, use
a metal detector to check
the applicable areas. Other-
wise, there is a risk of electric
shock/short circuit!
1. Space the holes in the wall where
you would like to mount the
Cinebar Trios (CS 42) at a distance
of 88.3 cm apart (corresponding
to the distance between the two
keyhole openings
(16)
). Use a ruler,
pencil and spirit level for this.
2. Use a metal detector to check the
drill areas. If necessary, select an-
other area for mounting.
3. Use an 8 mm rock drill to drill holes,
which are approx. 45 mm deep, at
the marked positions.
4. Insert 2 Nylon plugss (ø 8 mm) all
the way into the drill holes.
5. Screw one screw (5 x 50 mm) into
each Nylon plugs until there is
approx. 4 mm of space between the
wall and the screw head.
16
6. Press the Cinebar Trios (CS 42) up
against the wall so that the screws
vanish in the keyhole openings
(16)
.
7. Now pull the Cinebar Trios (CS 42)
down so that the screws slip into
the small slot.
8. If applicable, screw the screws
further in or out until the
Cinebar Trios (CS 42) is securely
mounted on the wall.
Содержание Cinebar Trios
Страница 35: ...35 Cinebar Trios CS 42...
