26
ASSEMBLING THE CABIN
GB
K
D
FITTING THE INSPECTION
DOOR
Position the shower cabin against
the wall.
Close the door and make sure that
the magnetic seals are aligned along
the entire length of the door.
In the event that the seals do not
come together - as in case (A) or
case (B) - adjust the top slide
assembly indicated by the arrow.
- Lift the door, grasping it by the
supports.
- Tighten the screw (D) until the
magnetic seals are aligned.
N.B. After adjusting the slide
assembly, lock the nuts (D) in place,
inserting the covers (K) with the
inner wings facing outwards.
12
USING THE SHOWER FOR
THE FIRST TIME
Once all of the connections are
made and before fastening the ca-
bin to the wall, remove all of the
adhesive tags.
Run the regeneration and a sauna
cycle, following the instructions
contained in the attached user’s
manual.
Make sure that there are no water
leaks in the connections made and
that everything operates normally.
If there is no power to the sauna
system after the electrical connec-
tion has been made to the mains,
press the red button on the power
unit box.
If the control panel displays an er-
ror message (all the leds will blink)
the first time the sauna system is
turned on, remove the grate and
press the button for resetting the
thermostat, indicated with the ar-
row.
11
ONLY FOR ARTICLES
122 STEAM - 122 EASY
