4 Zone DMX and RF wall panel
for Single Colour, Tunable White, RGB, RGBW
and RGBCCT LED strip
www.teucerled.co.uk
V002-11-2019
Controlling the LED strip
Sound ON/OFF:
When OFF more than 10
sec press and hold the Power button for
more than 5 seconds until you hear the
chime. Sound is now turned off. Repeat the
procedure to turn the sound back on.
• ON/OFF:
Turn ON/OFF LED strips on the last setting.
• Zones:
When ON choose the Zones you wish to control.
When OFF short press Zone to turn ON current Zone,
long press for 2s to turn OFF the desired Zone.
• RGB mode:
To adjust the colour, press the RGB mode
button, then touch the colour wheel.
• CCT (Tunable White or RGBCCT type):
Short press to
change CCT in 11 steps, long press to switch between
WW/CW
• CCT (RGB):
Short press to change CCT by mixing RGB
channels in 11 steps, long press to switch between
WW/CW
• CCT (RGBW):
Short press to change W channel in 11
steps, long press to switch between 0%/100%
• Dynamic play mode:
Short press to run next mode,
long press 2s to run mode-cycle
• Speed: (static mode)
Short press to change RGB
saturation in 11 steps, long press to change RGB
saturation in 256 levels
• Speed: (dynamic play mode)
Short press to adjust
speed in 10 levels, long press 2s to set default speed.
Speed button syncs the receivers play mode if out of
sync
• Brightness:
To adjust the brightness for the selected
Zones press the Brightness button. Press and hold for
continuous fine adjustment.
• Scene:
Long press 2s to save current settings to Scene,
short press to retrieve saved scene.
SCENE
S
ZONE
ZONE
ZONE
ZONE
1
2
3
4
SPEED
BRIGHT
MODE
M
CCT
RGB
FRONT
BACK
CCT mode /
CCT step
adjustment
RGB mode /
RGB step
adjustment
ON/OFF
AC INPUT L
AC INPUT N
WP-4RGBCT
DMX OUTPUT D+
DMX OUTPUT D-
DMX OUTPUT GND
Zones
Brightness
adjustment
Dynamic
play
mode
Scene
Dynamic mode speed /
Static RGB mode saturation
L
N
GND
D+
D-
DMX OUTPUT
INPUT
85-265VAC
86mm
86mm
45.5mm
59mm
35mm
62mm
11.5mm
Compatible
Back box types:
European style
86 size
Back box mounting
Wall panel
Bracket
Back box
Bracket removal
SCENE
S
ZONE
ZONE
ZONE
ZONE
1
2
3
4
SPEED
BRIGHT
MODE
M
CCT
RGB
Tunable White
LED strip type
RGB
LED strip type
ON/OFF
Zones
Single Colour
LED strip type
RGBW
LED strip type
RGBCCT
LED strip type
Tunable White
CCT
RGB
RGB
RGBCCT
MODE
M
RGBW
SPEED
Single Colour
BRIGHT
LED strip type
Setting the LED strip type
1)
Press ON/OFF to turn ON.
2)
Press ON/OFF again to turn OFF. Immediately after press and hold ON/OFF for more than 6 sec. You
have now entered into LED strip type mode.
3)
Press and hold desired Zone button for more than 3 sec until you hear the chime, then press and hold
the corresponding LED strip type button for more than 3sec.
4)
Press ON/OFF to save settings and turn ON.
