Tetra Pak Tetra Alex 25, Руководство по эксплуатации

Страница: 17 / 24

Operation
13
Tetra Alex
®
25
Doc No. OM-1244364-01
2.2
tf201
322.en
Production
• Set
the homogenising pressure
a) Adjust
the 2nd stage pressure adjusting valve to desired value or 20% of
the
homogenisation pressure.
b) Adjust
the 1st stage pressure valve to the decided value.
Check during production
• Homogenising
pressure
Fine
tune by help of the 1st stage pressure adjusting valve.
• Crankcase
oil temperature, maximum 55 ºC (131 ºF)
Risk of jam.
Avoid getting in contact with the pistons
• Product
inlet pressure
• If
a fault occurs, see section Trouble shooting in the Technical Manual.
Stop
• Turn
off the pressure adjusting valves for
a) 1st
stage
b) 2nd
stage
• Push
the stop button / Stop by external signal
Emergency stop
• Push
the emergency stop button only if there is a risk of damage to
personnel
or property.
Emergency stopped
The machine may contain hot liquid or cleaning solution.
Handle with outmost care to avoid exposure.
• Eliminate
the cause for the emergency stop.
• Turn
off the pressure adjusting valves for
a) 1st
stage
b) 2nd
stage
• Release
the emergency stop button and perform a normal start according
Start
and Production.
WARNING!
WARNING!