TESY MC 20112, Руководство по эксплуатации и хранению, Страница: 4 / 68

4
Usage and Storage Instructions
EN
3. Install the provided handle at the back of the appliance by
fixing the two screws as shown (Figure 3) with 2 screws of
4*14 is fixed into the correspond hole.
Figure 3
PRODUCT DESCRIPTION
Figure 5
Front grill
LED display
Control panel
On/Off switch
Feet
REMOTE CONTROL
1. ”ON/OFF”, Power on and off.
2. ”TIMER”, 24hours timer to set.
3. “SET”, press this knob to select
the working mode: LOW power,
MIDD power, HIGH power ,
AUTO, Frost.
4. “UP+”,increase the set
temperature or hour.
5. “DOWN-”,decrease the set
temperature or hour.
Note: Install 2X1.5V (AAA) not included battery. All
the functions performed with the remote control
work identically to the manual controls
OPERATION
The heater may be operated by the manual controls
located on the heater (as shown in Figure 6) or by your
remote control.
Figure 6
1. Place the heater on a firm, level surface.
2. Plug the cord set into a fit electrical outlet. Press the
main power switch at the bottom of right housing
(Power switch location see Figure 5). When heater
is power on, the LED display will show the room
temperature.
3. Turn on the heater by pressing the power button
upper control panel, and it is LOW mode, the power
is 750 W. Press the “SET” knob to MIDD mode, the
power goes up to 1250 W.
Press twice times the “SET” knob to HIGH mode, the
power goes up to 2000W.
Press three times the “SET” knob to the AUTO mode. The
heater works at different power which accord to the air
temperature.
•
When the air temperature is lower than 15°C, the
heater will work at HIGH mode automatically.
•
When the air temperature is at 16°C -20°C, the heater
will work at MIDD mode automatically.
•
When the air temperature is more than 21°C below
23°C, the heater will work at LOW mode automatically.
When the air temperature reaches to 25°C, the heater
will cut off automatically. When the air temperature
drop to 23°C, the heater will come back on LOW mode
automatically.
Press four times the “SET” knob to the FROST mode; the
working position is 7°C for air temperature.
4. To turn the Heater OFF, by pressing the Power
button again and turn off power switch.
Setting the temperature:
1. To set the temperature, when the LOW or MIDD or
HIGH mode, Press the
knob or “UP+”on remote
control to increase the desired temperature and
press
knob or “DOWN-“on remote control to
decrease the desired temperature.
2. When the air temperature reaches 2°C above the set
temperature, the heater will cut off automatically.
DOWN-
UP+
SET
ON/OFF
TIMER
1
2
3
4
5