TESY HV2001D, Руководство по эксплуатации и хранению

Страница: 3 / 60

Usage and Storage Instructions
3
EN
English
that disconnect the power plug from the socket.
•
Never touch the appliance with damp or wet hands
– there is danger for your life!
•
The power socket must be easily accessible all the time
in case the power plug has to be disconnected as fast
as possible! Never pull the power cord or the appliance
itself in order to disconnect it from the mains.
•
ATTENTION! Outgoing air gets hot during operation
(up to more than 100°C).
•
If the power cord of this appliance gets damaged,
stop its operation and call its supplier/retailer for
advice about repair in local service centre.
•
Do not cover the appliance. If the appliance gets
covered, there is risk of overheating.
•
If the appliance is damaged or does not work properly,
stop it and do not repair it yourself. For any kind of
repairs call for assistance an after-sale service centre.
This is the place where you will have your broken part
replaced with an original one. Non-adherence to this
instruction will compromise the appliance safety.
•
If you decide to stop using such kind of appliance,
it is advisable to render it unusable by cutting its
power cord after disconnecting it from the mains. It
is advisable all possible risks related to the appliance
to be secured, especially in relation to children that
may play with out-of-use appliances.
•
Never keep the appliance unnecessarily switched
on. Disconnect it from the power socket when you
do not intend to use it for a long period of time.
•
The appliance should not be positioned right under
a power socket!
•
Warning : Do not use this appliance with a
programming device, counter or any other device which
can automatically switch it on because if the appliance
is covered or improperly positioned this may cause fire.
•
Position the power cord in such a way that it does
not obstruct the free movement of people and
cannot be stepped on! Use only approved extension
cords which are suitable for this appliance, i.e. have
got a conformity sign!
•
Never move the appliance by pulling its power cord
and do not use the power cord for carrying objects!
•
Do not bend the power cord and do not stretch it
over sharp edges, do not position it over hot plates
or open flames!
•
Never use this appliance in close proximity to wet premises
– bathroom, a shower cabin or a swimming pool!
PACKING
•
After unpacking the appliance, check if all its elements are
included in the packing and that it has not been damaged
during transportation! In case damage or incomplete
delivery is found, contact your authorized retailer!
•
Do not throw away the original packing! It could
be used for storage and transportation purposes in
order to avoid damages during transportation!
•
Disposal of packing materials should be done in
the appropriate way! Children should be prevented
from playing with polyethylene bags!
INSTALLATION AND OPERATIONS INSTRUCTIONS
Before operating your panel heater:
•
Set the panel heater into correct working position
before connecting it to the electric system;
•
Select a suitable place for your panel heater,
keeping in mind the safety precautions;
•
The appliance has got two power modes: „I” stands
for 1000W, ‘’II” stands for 2000W. The total maximum
power when both power modes are on is 2000W
•
The appliance is equipped with an electronic
regulator. In order to switch on the appliance, push
the switch-on button .
After switching-on the panel heater, an indication
lamp will flash on – the panel heater operates at 1st
power level. In order to switch to the second power
level, push once “ ” button. By pushing any of the
buttons “ ” or “ ”, you can change the power
mode in which the panel heater operates.
•
In order to adjust the desired room temperature, which
you want your appliance to maintain, you should push
button (with an indicated thermometer on it), then by
pushing any of the “ ” or “ ” buttons, you can adjust the
temperature value (15°-32°). The thermometer symbol will
flash on and the digital display will show the temperature
settings. After 6 seconds the display will stop blinking and
will show the current room temperature.
•
In order to adjust the timer – push ,
button, then the clock will flash on. By the “ ” or
“ ” buttons adjust the time period (in number
of hours) for which the appliance will operate
and when it expires, the appliance will switch-off
automatically.
•
The available power levels are presented indicatively.
MOVING THE APPLIANCE:
If it is necessary to move the appliance to another place
of operation, switch it off by pulling the power plug out
of the socket, holding the appliance handles with both
hands, move it to its new position, having in mind that the
appliance must get cold (cooled down) before doing this.
Moving hot appliances may lead to bad consequences for
the user like burns or inflammable materials entering the
panel heater during its movement.