8
Usage and Storage Instructions
EN
AU mode
In the manual programming modes, press the “PRO”
button, the
flash.
1.
Use the “+” button and “-” button to set the AU
mode.
2.
Press the “PRO” button until the “PROG” appears in
the display.
3.
Use the “+” button and “-” button to set the program
number.
4.
Press the “C/M” button, the days flash.
5.
Use the “+” button and “-” button to set the days.
OPEN WINDOW FUNCTION
Open window Function
: Activated by pressing
.
When the device works and the environment
temperature change in a big range the appliance will
shut off automatically.
Pressing again
will cancel
this function.
Note:
After 5 seconds the preset is shown
continuously in the display and the settings are
taken over.
OVERHEATING PROTECTION
The in-built overheating protection automatically turns
the appliance off in case of an error! In that situation
the plug must be disconnected from the mains and the
control switch put in position “0”. After a short period of
cooling the appliance is ready for operation (in about
10-15 minutes)! If that error is repeated – consult an
authorized service at your location!
CLEANING
•
You must first turn off the appliance and disconnect
its plug from the socket. Do not use abrasive
detergents!
•
Clean the body with wet cloth, vacuum cleaner or
a brush!
•
You must never submerge the appliance under
water – there is life danger!
•
If the appliance should not be used for a certain
period of time it must be secured from excessive
dirt and dust by placing it in its original package.
•
You must never place the hot appliance in its
package!
Warning: in order to avoid
overheating do not cover the appliance!
Instructions for environment protection
Electric appliances out of use contain valuable
materials and hence must not be disposed in
domestic dumbs! We kindly ask you for cooperation
and active role in preservation of natural resources by
disposing the appliance to the organized buy-back
locations (if there are any).
