4
Usage and Storage Instructions
EN
PACKAGE
•
After unpacking the appliance you should check if
it is not damaged during transportation and if all
the components are included! In case that you find
out any damage or incomplete package you should
connect with your authorized retailer!
•
Do not discard the original packing box! It could be
used to store the appliance during transportation in
order damages to be avoided!
•
The disposal of the packing material should be
done in the appropriate way! Children should be
prevented from playing with the polyethylene bags!
MOUNTING ON A WALL
1.
Please ensure that the walls of the installation
location without wires, pipes, etc., to ensure that the
device can be securely mounted on the wall
2.
The appliance is intended only for vertical wall
mounting! Floor or ceiling mounting is forbidden!
3.
Never position the appliance right below a socket
outlet!
4.
The appliance should be assembled and connected
by a qualified electrician. The installation process
should be isolated from the mains before electrical
connection works are to be done.
5.
Position the power cord so that it does not hamper
free movement of people and not to be stepped on!
Use only approved extensions, which are proper to
the appliance, i.e. they have a compliance sign!
6.
The power cord should not be in touch with hot
parts of the appliance!
7.
Do not use the appliance in rooms smaller than 4
square meters.
FIXING TO THE WALL
Warning! To prevent damage or the risk of fire:
•
Ensure a sufficient distance from the wall (min. 25 cm
at the sides), ceiling (min. 20 cm), floor (min. 1.5 m),
fixtures (min. 1 m) or other appliances (min. 1 m).
•
Only use the fastening bracket provided for fixing
the appliance to the wall, to ensure the necessary
distance from the rear wall.
1.
Selecting a place to install the appliance
•
on a wall that is sufficiently strong
•
which is somewhat sheltered, so that the appliance
is not shaken excessively by strong winds;
•
at least 1 m from people, animals and plants;
•
which complies with the distances shown in the
sketch below
Note:
The appliance is manufactured entirely of
rust-proof materials and can be exposed to normal
environmental impacts
2.
Mark the drill holes according to the diagram:
Drill 2 holes with diameter 6 mm in the wall, The drilling
depth is approx. 40 mm
Supplied round sticker
3.
Insert a wall plug into each hole.
4.
Screw two long screws into each hole. Allow the
head of the screw 5mm so that the appliance can be
hung on these.
