11
EV-300
Total capacity (EN 12897)
І
300
Actual capacity (EN 12897)
l
302
Insulation Rigid PU
mm
50
Maximum operational
temperature
°C
95
Max. pressure of water tank
MPa
0.8
Net. Weight
kg
66
EV-300
T
Thermometer
G ½”F (R15)
CW
Inlet cold water
G 1”F (R25)
HW
Outlet hot water
G 1”F (R25)
AV
Air ventilation
G ¾”F (R20)
EE
Electric heating element
– optional set
G 1½”F (R40)
ATTENTION: The electrical heating element should be approved by the producer of the high
capacity water heater. Otherwise the producer does not follow any warranty conditions and he
is not responsible for any abnormal work of the appliance.
2. Assembling and Connection
ATTENTION!
Qualified
technicians must perform all technical and electrical assembly
works.
2.1. Installation
Water heaters are delivered on an individual transport pallet. If the high capacity water heaters
are used in premises with low humidity and flat floor you can leave the pallet as it is mount on
the appliance, otherwise – please follow the described steps bellow (fig. 4):
Put the water heater in horizontal position;
Unscrew the three bolts which hold the pallet to the water heater;
Mount the adjustable feet directly to the appliance;*
Put the high capacity water heater (HCWH) in vertical position and adjust the level
using the feet.
*If the adjustment feet are delivered in separate parts you can assemble them as follow (fig. 5):
put the part 1 on bolt 2 which is unscrewed from the pallet
put the washer 3 which is removed from the pallet
Screw on the nuts 4 which are delivered with the appliances
