TESY CN03 050 EIS Wi-Fi, Инструкция по эксплуатации

Страница: 21 / 24

Instructions for using the built-in wireless communication module (Wi-Fi)
21
EN
English
13. Calculating the power consumption
13.1. Select the Power Calculator Menu and enter the value of the declared power in the designated field. This
power is declared on the nameplate of your appliance (the value must be in Watts).
13.2.
To calculate the power consumption from the time of the first switching on of the appliance, press the
Calculate button.
13.3. If you wish, you can use the RESET button, then the appliance will start calculating the new power
consumption from the time in which you have reset the old value.
13. 1 13. 2 13. 3
SUPPORT OF ADDITIONAL FUNCTIONS:
•
Function: GROUPING :
The built-in Wi-Fi module allows the use of a software function which groups together several convectors. This function is
implemented by placing a check mark in the control field .
Control of the group is implemented by selecting one convector (whichever one of the group) which is used to set the
operation mode of all the others. This function is active in Status, and you can enter manual settings in the following
modes: Manual, Sleep , Delay start/stop. When you select the Program mode each convector will operate according to
their own prior settings in the weekly programmer. Excluding a convector from the group - this is done by removing
the check mark.