Tesup MASTER 940, Руководство пользователя

Страница: 5 / 33

TESUP MASTER 940 (MADE IN EUROPE)
~ 5 ~
TESUP
▪ Before you begin installing, read this entire owner’s manual. Identify and note your model
wind turbine where it appears in this manual. Following the instruction and
recommendations in this manual will help assure safe and enjoyable use of your new
renewable energy system.
▪ Please take the time to read through this manual prior to assembly.
o
Place this instruction manual in a safe place for reference.
o
Wait until a calm day to install or perform maintenance on your Turbine with
activation of brake.
o
Listen to your Turbine, if you hear any mechanical noise, maintenance may be
required, please contact your Turbine dealer.
o
After installation re-adjust and tighten the screws and bolts.
o
Adhere to proper grounding techniques as established by the National Electrical
Code.
o
Your Wind Turbine must be installed in accordance with this manual and local and
national building code. Incorrect installation may void your warranty.
o
Wind Turbine blades spin at a potentially dangerous speed, this must be respected.
Never approach a Turbine in motion.
o
Note wire size prior to wiring. Any under sizing of wire can be potentially
dangerous.
o
Check the manual brake periodically.
o
Check the battery health periodically. The low battery voltage and improper
connection can cause over-spin issues.
2.1.1 Operating and Installing Conditions:
▪
Please make sure that:
o
The wind turbine system has been erected correctly by a suitably trained
person.
o
All operating personnel have read and fully understood this translation of the
original instructions
o
The wind turbine system is properly maintained and repaired.
2. GENERAL
2.1 GENERAL INSTRUCTIONS: