Tesup MASTER 940, Руководство пользователя

Страница: 20 / 33

TESUP MASTER 940 (MADE IN EUROPE)
~ 20 ~
TESUP
7.3 UNPACKING THE COMPONENTS:
▪
Carefully open the packaging.
▪ Check the shipment for completeness (refer to the shipping documents).
▪ Separate the packaging material and dispose of it in an environmentally responsible
way.
7.4 ASSEMBLING THE WIND TURBINE:
Turbine Assembly:
▪ For installation, select sheltered place.
▪ Hold propeller blade (1) with flat side to hub (2).
▪ Fasten with a M6x25 bolt, nut and one.
▪ Screw on further M6x25 screws and tighten by hand.
Balancing the rotor:
▪
Move rotor to Y position (see Fig. 7)
▪
Carefully release rotor blade.
▪
Observe in which direction the rotor turns
(the heavier rotor blade pushes downwards).
▪
Repeat the process for all three positions
to determine which rotor blade is in imbalance.
▪ Check reveller for balance
▪ Tighten all screws to 25 Nm.
▪ Check balance again.
▪ Secure all screws with locking varnish.
WARNING:
Choose an assembly
site which is sheltered from the wind.
The assembly process requires calm
weather conditions.
Always replace the complete set of
rotor blades.
NOTE:
Note: The repellers have already been
tested for equal weight by the manufacturer.