TESTO Smart Probes 115i, Инструкция по эксплуатации

Страница: 11 / 17

2.9.5
Select “Temperature (IR)”
Smart Probe: t805i
1. Press and select Edit view

s
ee “2.5 Settings view”
2. Select set emissivity

Choose between pre-configured default emissivities or put
them in manually
3. Press the button of t805i to start the measurement
4. Take a picture of the multi-point laser circle on the measured
application
2.9.6
Select “Mould Indication”
Smart Probe: t805i
Optional Smart Probes: t605i
1. Press and select Edit view

see
“2.5 Settings view”
2. Select Configure measurement

Select ambient temperature/ humidity to calculate the relative surface moisture (%RH wall)

Choose between measuring ambient conditions automatically with a t605i or enter them
manually

Relative surface moisture is calculated by the surface and ambient temperature as well
as by the humidity.
3. Select set emissivity

See
“Temperature (IR)”
4. Red/ Yellow/ Green bar indicates the mould risk

Values are displayed on top of the screen
5. Press to deactivate the camera
6. Press to take a photo and to activate/ deactivate flash