TESTO Sensor LD pro, Инструкция по эксплуатации

Страница: 22 / 48

Operation
Testo Sensor LD pro V2.00 Page 22 of 48
10.6.1 Measuring point designation / selection
Store

Meas. Point
10.6.2 Parameter of measurement (Re-Check)
Store

Parameter
At this point, it is again possible to check and correct the parameters „Pressure" and „Distance".
Changing the parameters gives new values for leakage and cost.
Execution of the corrections see description
chapter 10.2
All information about the measuring point can
be changed by selecting the corresponding text
field or the stored measuring points can be
loaded from the internal database.
Then a menu opens with the available / saved
entries.
When selecting a saved value, select it
(highlighted in green) and then take over with
„OK“.
If a new entry is necessary, the input menu
opens after pressing the „new“ button.
Input is accepted via „OK“.
This procedure is analogous to enter the
information for company, building and location.
Using the „delete“ button, individual entries can
be deleted.