TESTO 0560 8681, Инструкция по эксплуатации

Страница: 21 / 42

6 Performing the measurement
19
6.1.2 Activating the differential temperature
Differential temperature enables the temperatures between two measuring
points to be calculated.
1 - Open Menu .
2 - Select Measurement settings .

The Measurement settings menu opens.
3 - Select Differential temperature and press OK .
4 - Select Active and press OK .
5 - Select which differential temperature is to be calculated (P A vs. P B,
P A vs. Probe, P A vs. Value, P A vs. RTC).
5.1 - P A vs. P B selection:
o Move the joystick
to the right → select measuring point
1
→
press OK
→ move the measuring point to the live image using
the joystick
→ press
OK .
o
Move the joystick
to the right → select measuring point
2
→
press OK
→ move the measuring point to the live image using
the joystick
→ press
OK .
5.2 - P A vs. Probe selection:
o Move the joystick
to the right → select measuring point
1
→
press OK
→ move the measuring point to the live image using
the joystick
→ press
OK .
5.3 - P A vs. Value selection:
o Move the joystick to the right
→ select measuring point
1
→
press OK
→ move the measuring point to the live image using
the joystick
→ press
OK .
o Move the joystick to the right, set the value manually.
5.4 - P A vs. RTC selection:
o Move the joystick
to the right → select measuring point
1
→
press OK
→ move the measuring point to the live image using
the joystick
→ press
OK .
o
Move the joystick to the right, set the RTC value in the
Emissivity menu, see the section "Setting RTC".

The differential temperature is shown in the top centre of the display.
6 - End measurement: Select Active and press OK (no check mark).