TESTO 0560 3163, Инструкция по эксплуатации

Страница: 21 / 22

10 Tips and assistance
19
10 Tips and assistance
10.1 Questions and answers
Question Possible cause Possible solution
Zero point is unstable Contamination of the
sensor after a prolonged
period of non-use Leave the instrument
switched on until the
zero point has stabilized.
Instrument does not
switch to measuring
mode (remains in warm-
up phase) Battery voltage too low Charge the instrument.
10.2 Error codes
Error code Error
E001 Memory error
E002 Sensor error
The error code is shown on the display.
10.2.1 Hard Reset
1
If you encounter any problems with the firmware, press and hold the
ON/OFF key for a long time (4 sec.) to perform a reset.
10.3 Accessories and spare parts
Description Order no.
Transport bag 0590 0018
Mains unit from Testo 0664 1107
11 Support
You can find up-to-date information on products, downloads and links to contact
addresses for support queries on the Testo website at: www.testo.com.
If you have any questions please contact your local dealer or the Testo
Customer Service. You can find contact details on the back of this document or
online at
www.testo.com/service-contact.